Duet 2 Maestro
An advanced 32-bit electronic board to power your 3D printers. A dedicated ethernet cable is provided in the box.
Overview
The Duet 2 Maestro is an advanced 32-bit electronics board to control 3D printers and other CNC machines. It is in the same product family as the Duet 2 Wifi and Duet 2 Ethernet. It runs the same advanced and flexible RepRapFirmware. The main difference is that the Duet 2 Maestro has lower current stepper motor drivers and less expandability than the Duet 2 Wifi and Ethernet, and it only comes in an Ethernet option.
Features
- Powerful 32 Bit
- Dedicated ethernet
- Super quiet TMC2224 stepper drivers, up to 256
- High-speed SD card and support for a second SD external card if
- Three heater channels for a heated bed and two extruder
- Support for Thermistors and PT1000 sensors wired directly to the Maestro, along with Duet3D PT100 and Thermocouple
- Power rating: Each stepper driver is capable of up to 6A peak motor current. The bed heater channel is specifically designed for high current
- Connect via PC, tablet, or smartphone on the same network to the onboard web interface
- Setup your printer and update the firmware through the web interface
- All common 3D printer geometries are expandable up to 4 extruders with Firmware support for mixing hotends and remapping axes to use 2 high power external
- Support for the PanelDue: a full-color graphic touch
- Support for a low cost 12864
- Provided with Molex compatible plugs and crimps as well as spade connectors for power. If setting up or re-flashing using USB, you will need to supply your own micro USB cable
- Support for DC42’s IR Z probe and the Duet3D Smart Effector for delta
Documentation
The Duet 2 Wifi can have Thermistors or PT1000 sensors connected directly. Alternatively, Duet has two different temperature sensing daughterboards available:
Duet also provides genuine E3D PT100 and thermocouple sensors compatible with their range of hotends: